The Science Solutions Systems Proof Newsroom → Start a Project

Solutions
By Sector

PFAS contamination doesn't look the same everywhere. Municipal liability differs from industrial discharge. Military AFFF remediation differs from residential well treatment. Hexivon scales and configures to your specific challenge — same validated core technology every time.

Solution 01
01

Municipal Water Systems

Municipal water systems are now operating under EPA-mandated maximum contaminant levels for PFAS. The liability exposure for utilities that fail to meet these standards is significant and growing.

Hexivon provides the only solution that permanently eliminates PFAS rather than creating a concentrated waste byproduct that must be managed downstream. Integrates with existing infrastructure. Scales to any system size.

EPA MCL compliance deadlines creating urgent treatment mandates
Existing GAC and RO systems create PFAS waste streams still needing management
Ratepayer pressure to control treatment upgrade costs
Regulatory reporting requirements demanding defensible third-party data
Start a Municipal Project →
Municipal Solution Specs
10K – 150M+
Gallons Per Day
Non-Det.
PFAS in Treated Water (NC Pilot)
Months
Typical Deployment Timeline
Why Hexivon vs. GAC / RO
No concentrated PFAS waste to manage
No carbon bed replacement cycle
No reject water requiring further treatment
~90% lower operating and maintenance costs
EPA-accepted validation methodology
Industrial Solution Specs
Any Conc.
Handles Any PFAS Concentration
In-Line
Integrates with Existing Process Flow
Zero
Toxic Byproduct Discharge
Applicable Industries
Chemical and specialty manufacturing
Semiconductor and electronics fabrication
Textile and surface treatment
Oil and gas water management
Food processing and packaging
Solution 02
02

Industrial Operations

Industrial facilities are among the largest generators of PFAS-contaminated water. Process water, stormwater, and discharge streams carry PFAS — and regulators are tightening discharge limits rapidly.

Most operators currently rely on activated carbon or membrane filtration that removes PFAS but produces concentrated waste still carrying liability. Hexivon eliminates the waste stream entirely.

Discharge permits increasingly requiring PFAS destruction, not just removal
Liability for off-site PFAS migration from facility discharge
Carbon and membrane systems generating hazmat-level concentrated waste
Start an Industrial Project →
Solution 03
03

Military & AFFF Sites

Aqueous film-forming foam used in military firefighting training has contaminated groundwater at hundreds of active and former installations. PFAS concentrations at these sites are often orders of magnitude above the EPA MCL.

Hexivon's system is designed for in-situ deployment. It doesn't require excavation or water table drawdown — it treats the water where it is, destroys the PFAS permanently on-site.

Extremely high PFAS concentrations requiring high-performance treatment
Regulatory pressure to demonstrate permanent destruction, not containment
Large plume volumes requiring infrastructure-scale treatment
Discuss a Military Site →
Military & AFFF Specs
In-Situ
On-Site Deployment — No Excavation
High Conc.
Handles Extreme PFAS Concentrations
100%
Destruction — No Waste Transfer
Permanent destruction meets DoD remediation objectives
Eliminates off-site waste transport liability
Third-party validated data for regulatory submittals
Environmental & Residential
1K+
GPD — Residential & Small Systems
Application Types
Private wells near contaminated sites
Small community water systems
Environmental remediation consultants
Land reclamation and brownfield redevelopment
Agricultural irrigation water treatment
Solution 04
04

Environmental & Residential

PFAS contamination doesn't respect system boundaries. Private wells, small community systems, and land reclamation sites face the same chemistry — they just need solutions that scale to their volume.

Hexivon's modular architecture means the same validated technology that treats 150 million GPD for a metropolitan utility configures for a 1,000 GPD residential system. The result is identical.

Discuss Your Application →
The Regulatory Moment

The Liability Window
Is Open Right Now

PFAS regulation has moved from emerging concern to enforceable mandate. The EPA has set maximum contaminant levels. States are adding their own. Courts are assigning liability to operators who knew about PFAS contamination.

The operators who act first — who permanently eliminate their PFAS — close the liability window. Hexivon is how you close it.

Start a Project →
2016
EPA issues health advisories for PFOA and PFOS — beginning of federal regulatory action.
2021
PFAS Strategic Roadmap — EPA commits to MCL rulemaking and comprehensive action.
2024
Final MCL rule published. Municipalities have a compliance clock running. Industrial operators face parallel permit requirements.
Now
Compliance is mandatory. Operators who eliminate PFAS permanently are protected. Those who don't face mounting liability.

Which Solution Fits Your Site?

Every PFAS challenge is different. Tell us about yours — we'll match you with the right system configuration, scale, and deployment approach.

Family of Brands

One Platform.
Six Specialized Solutions.

Every brand runs on Hexivon's proven Strip → Enrich → Destroy process — purpose-built for your sector.

Hexivon
Global Solutions
Sub-brands
ZeroSign
ZeroSign
Drinking Water
Blue Future
Blue Future
Water Waste Mgmt
PureAfter
PureAfter
Industrial Water
Mineral Command
Mineral Command
Military & AFFF
Planet Clear
Planet Clear
Land Reclamation
Explore All Solutions →